Description

1. This double-sided tape is 3M 5952 VHB (Very High Bond). Width 1/2 inch, length 15.6ft, single layer thickness 1.1mm. 2. It's widely used for LED light strips, electronic product mounting, nameplates, address plates, signs, mirrors, hangers, photo frames, power strips and other home and office decorations. It is also excellent for attaching exterior parts to cars, such as spoilers, stainless steel trim, aluminium rear window louvres, air vents and door trim. 3. It fits perfectly for smooth surfaces such as glass, marble, plastic, ceramic tiles, wood and metal. Before applying this double-sided tape, clean the adhesive surface with alcohol and wait for it to dry. 4. Waterproof, high temperature resistance and no residue when removed. It is made of viscoelastic acrylic foam which gives the tape excellent performance. 5. The best installation temperature range for this double-sided tape is 16-38 ℃. Adhesion will weaken on cold days, if the temperature is below than 10 ℃, we recommend that you heat the double-sided tape with a hair dryer to allow the chemical molecules on the tape to recover optimally. Product Description Key Features: Heavy Duty According to 3M Lab, each 0.5 in² can withstand 3.3lb. Note: This is the result with stainless steel and in a 22℃ environment. Water Resistant Once bonded, it can provide strong adhesion in bathroom and outdoors. High Temperatures Resistance Long-term high temperature resistance of 194℉, short-term up high to 300℉. Materials suggested: This double-sided tape fits perfectly with materials such as glass, wood, ceramic tiles, aluminum, plastic, marble and metal. Attention Please: Please do not use it at powder coated walls, leather, rubber and silicone and hollowed out surfaces. 3M Primer 94 is suggested to be used together if you have needs to apply this double-sided tape on rubber and silicone. Cleaning is essential. Please use alcohol to clean the surface of the bonding surface and make sure it is smooth, dry and free from dust and oil stains. As the central paper roll uses a small portion of the tape, the actual length that can be used is approximately 15ft. The best temperature range for this double-sided tape is 16-38 ℃. If the temperature is below 10°C, we recommend heating the double-sided tape with a hair dryer to allow the chemical molecules on the tape to recover in the best condition. This double-sided tape requires time and pressure to achieve maximum adhesion. You need to press firmly on the surface and then remove the red protective film. The best adhesion occurs with time. It reaches 50% adhesion in 20 minutes, 90% adhesion in 24std and 100% adhesion after 72 hours.